AGFA SelectSet Avantra 25S Laster Imagesetter Computer to Plate System

AGFA SelectSet Avantra 25S Laster Imagesetter Computer to Plate System

Computer to Plate System Specifications

Imaging Technology: Internal drum, 180 degrees
Maximum Format Area: 15 x 25″ (47.5 x 63.5 cm)
Maximum Image Area: 17.7 x 25″ (44.9 x 63.5 cm)
Physical Dimensions: SelectScan Avantra 25S recording engine
Width: 47″ (119 cm)
Height: 48″ (121 cm)
Depth: 29″ (73 cm)
Weight: 750 pounds (340 kg)
Environmental

Temperature: 64° – 84° F
(18° – 29° C)
Relative Humidity: 35% – 75%, non-condensing
Electrical Requirements: 110/230v, 50/60 Hz, 400 W
Resolutions and
Corresponding Spot Sizes: 1,200 dpi (472 dots/cm) at 20µ
1,800 dpi (708 dots/cm) at 15µ
2,400 dpi (945 dots/cm) at 10µ
3600 dpi (1417 dots/cm) at 7.5µ
Maximum Imaging Speeds:

Dpi Sq. in./min. Cm2/min Full area
1200 625 4032 0:42
1800 417 2684 1:04
2400 312 2013 1:25
3600 208 1342 2:07
Maximum Line Screen: 425 lines per inch (165 lines/cm) for Agfa Balanced Screening
Screening Technologies Supported: Agfa CristalRaster Screening
Agfa Balanced Screening
Adobe Accurate Screens
Standard PostScript RT Screening
Imaging System: Visible red diode (650µm wavelength)
Repeatability: ± 0.2 mils (0.005 mm) over 8 consecutive 18 x 25″ (457 x 635 mm) outputs at 70° F (21° C) and 50% relative humidity
Media Types: RC Paper
Film
Polyester Plate Material (Agfa Setprint)