ECRM MAKO 2 Computer to Plate System w/ Rip
Computer to Plate System Description
The MAKO 2 CTP provides an easy, value-packed entry into CTP production with a full resolution range of 1200 – 3556 dpi. It is one of the fastest 2-page CTP units in its class, imaging over 27 GTO plates per hour at 2400 dpi. By combining simplicity, versatility and proven imaging technology, the MAKO 2 brings maximum CTP benefi ts including reduced operating costs and improved quality on press to 2-page printers.
ECRM’s versatile platesetter technology provides ultimate format flexibility – accommodates all 2-up presses and some 4-up presses.
Future-proof design allows a smooth transition to violet chemistry-free plate technology.
Flexible – ECRM’s patented press registration pin bars allow for both edge and notch registration, matching a wider range of press requirements.
Fastest plate loading of any CTP device. Simply register a plate and lower the pinch lever bar.
No hidden extras – our online conveyor is standard on all MAKO CTP, allowing for a direct connection to the processor at no extra cost.
ECRM’s easy to use CtServer is included with the MAKO 2 and is custom-made to fi t your needs. Our open-ended software system accepts 1-bit TIFF fi les – choose the solutions you want. ECRM is here to help.
ECRM’s patented plate handling and optical system provide long life and low replacement cost.
Simple and intuitive operator interface makes training easy.
Basic electricity requirements and quick installation—no dedicated power line needed. Low energy consumption, draws the same energy as a PC.
Computer to Plate System Specifications
Maximum: 560mm x 670mm (22.0” x 26.4”)
Minimum: 228mm x 252mm (8.9” x 9.9”)
0.14mm to 0.35mm (0.0055” to 0.014”)
Violet-sensitive photopolymer and silver halide metal plates.
See media specifications for safe-light information.
Violet laser diode (405 nm), available for photopolymer or silver halide plates
Seven resolutions from 1200 to 3556 dpi (472 to 1400 dpcm)
Resolutions include: 1200, 1270, 1800, 2400, 2540, 3048, and 3356dpi
Maximum Line Screen
Up to 200 lpi (78.7 lpcm). Media dependent
0.025mm (0.001”) typical
May vary according to media type and processing conditions
Plates are moved to processor automatically by a transport bridge – standard equipment on MAKO 2.
Power: 100 – 240 Volts; 3 Amps; 250 watts maximum; 50/60Hz, single phase
Heat Dissipation: 850 BTU/hour
62-86 degree F (17-30 degree C); ); relative humidity 45 – 65%, non-condensing. Relative humidity outside of this range may affect performance. Operating conditions outside plate media specifications may affect performance.
145.5 kg (320 lbs.)
96.5cm (38.0”) Length: 160.0cm (63.0”) Height: 188.0cm (74.0”)