Rena 2 Inch XPS ProTab Tabbing Machine

Rena 2 Inch XPS ProTab Tabbing Machine

S/N 0904 160

Tabbing Machine Description

The XPS ProTab is designed to apply pressure sensitive tabs/ labels on to flat product. You can use the system as a wrap around tabbing device or use it as a labeler. The system is made up of
two major components, the transport base and the tabbing head. The tabbing head is movable to enable tabbing on either edge of a mail piece. If the system is used as a flat tabber or labeler, the head can be located to position the label anywhere on the piece. Tab/ Label position over the length of the product is adjusted electrically through the operator interface. The product is introduced into the system by a feeder, conveyor, or ink jet system. The product is justified to a side guide by adjusting the transport table position and the registration wheel assembly. A knob that raises and lowers the height of the tabbing head and the upper output transport assembly adjusts for product thickness. When the product is transported, it is detected by a through-beam sensor that tells the tabbing head to apply a tab. If more than one tab is to be applied to a product, this can be set at the operator interface. After the tab is applied, the product passes through a number of rollers and guides to ensure that the tab/label is firmly applied and wrapped tight against the product edge.